تسجيل الدخول

مشاهدة النسخة كاملة : evox والسيدي rrw


sul911
11-06-2003, 12:17 PM
انا رفعت ال iso للملفات evox.ini والـ default.xbe ويوم حطيته على الكس بوكس ما اشتغل يقول لي غلط السيدي :غضب: ورحت حطيت معهن ملف السكن نفس المشكلة:"

ابي الحل
sul911
11-06-2003, 01:02 PM
الدرايفر حقي سامسونغ وتاريخ انتاج الإكس بوكس 12-11-2002 يهني اصدار 1.0 أو 1.1 وترى يوم احط السيدي الإكس بوكس مهب مشبوك بالشبكة
nadp
11-06-2003, 01:36 PM
اخوي....
الصراحة ما فهمت عليك?: بس بقللك المفروض شو اتسوي


u put all the evox files (default.xbe,evox.ini,skins[folder],bios[folder],xxxxxx.nfo) in a folder, u then open xISO and press the button "create ISO".
u then select the folder were u put all of your evox files. then u will get another window asking u were to save. save anywere OTHER THAN the folder you put the evox files in.

u then open primoDVD, under "Drive", highlight the DVD-RW/CD-RW drive you want to use to burn your iso.
Then press on the 3th icon if you start from the left.
http://xbox-scene.com/imageserver2/primodvd/02xs.jpg
Make sure to select "Other images ..." under "Files of type".
Standard PrimoDVD will only look for .gi files.

Select the .iso file and press "Open"
http://xbox-scene.com/imageserver2/primodvd/05xs.jpg
Press on the icon indicated below and make sure the settings are :
Recording Type : Disc at Once (DAO) , Closed
Mode and blocking : CD Mode1 (Blocking 2048) - DVD
http://xbox-scene.com/imageserver2/primodvd/06xs.jpg
Double click on the burner you want to use. (on the left side)
Under "Jobs" one job should be listed. Press "F6" to start burning.

And by the way, if you can, try to select a speed of 8X CDRW...or burn at speed of 4X or 8X...not more (since the xbox cant read more than 8X)

:-)
it should work:-)
sul911
11-06-2003, 03:24 PM
ممكن تعطوني ملف الـ bios

لازم إذا بغيت أحط السيدي في الإكس بوكس يصير الإكسبوكس مشبوك على الشبكة ولا لا

وبالنسبة هنا Mode and blocking : CD Mode1 (Blocking 2048) - DVD

إذا بغيت اخليه على cd:rw نفس الاختيار ولا اغيره
nadp
11-06-2003, 07:15 PM
هي..حطها CDRW...

و ما فهمت سؤالك الاول?:
sul911
11-06-2003, 07:22 PM
تم حل المشكلة :cool:
DeadLy_
11-06-2003, 11:48 PM
الرسالة الأصلية كتبت بواسطة nadp
اخوي....
الصراحة ما فهمت عليك?: بس بقللك المفروض شو اتسوي


u put all the evox files (default.xbe,evox.ini,skins[folder],bios[folder],xxxxxx.nfo) in a folder, u then open xISO and press the button "create ISO".
u then select the folder were u put all of your evox files. then u will get another window asking u were to save. save anywere OTHER THAN the folder you put the evox files in.

u then open primoDVD, under "Drive", highlight the DVD-RW/CD-RW drive you want to use to burn your iso.
Then press on the 3th icon if you start from the left.
http://xbox-scene.com/imageserver2/primodvd/02xs.jpg
Make sure to select "Other images ..." under "Files of type".
Standard PrimoDVD will only look for .gi files.

Select the .iso file and press "Open"
http://xbox-scene.com/imageserver2/primodvd/05xs.jpg
Press on the icon indicated below and make sure the settings are :
Recording Type : Disc at Once (DAO) , Closed
Mode and blocking : CD Mode1 (Blocking 2048) - DVD
http://xbox-scene.com/imageserver2/primodvd/06xs.jpg
Double click on the burner you want to use. (on the left side)
Under "Jobs" one job should be listed. Press "F6" to start burning.

And by the way, if you can, try to select a speed of 8X CDRW...or burn at speed of 4X or 8X...not more (since the xbox cant read more than 8X)

:-)
it should work:-) اقول ليش ما تحط
لنا موضوع اخوي تكتب فيه عن شيء نقدر نستفيده مثلا مثل اللي تتكلم
عنه الحين مع الاخ su :# اذا ممكن ؟
nadp
12-06-2003, 01:16 AM
والله اخوي..اول ما اخلص من الامتحانات...بحطلكم دروس...
تركيب المود شيب،تركيب الevox...الخ

لا يهمك:-)