موضوع الباتش شبة المتكامل we7

[W11 PELE]

هاذا موضوع شبة كامل بس ما قدرت اعربة والسبب المدارس


نبدا الدرس الاول


TUTORIAL 1: CREATING AN IMAGE (BIN/CUE) OF WE7 TUTORIAL 1: CREATING AN IMAGE (BIN/CUE) OF WE7



Open CDRWin.
- Put your original WE7 CD in the CD-Rom of your PC.
- Select Extract Disc/Tracks/Sectors.

You will now be presented with a screen that looks like this:

[W11 PELE]

وهاذي تكملة الدرس الاول


Now, make sure the box right next to "RAW" is ticked, as it is on this picture. Now press the box next to "Image Filename" and you will be
presented to a box as if you are to load a file, but you are actually just setting the path to where your CD image will eventually be saved. Type in any name you want, it does not really matter, and choose whichever path you want, it doesn't matter as long as you remember it yourself. Here's my example:

[W11 PELE]

وهاذي الخطوة الاخيرة


- Press Start

Depending on the speed of your CD-Rom you will have the image of your game in a few minutes. The image will be saved as one .cue file and one .bin file, the .cue file is supposed to be really small and the .bin file is supposed to be really big.

[W11 PELE]

اسمحلوي على الصورة كانت غلطة مطبعية



GUIDE TO PATCHING WE7

















بعد ما تسون الي في الصورة سو

Press "Apply".

Wait (depending on the size of the patch, this could take anything from 2 seconds to a couple of minutes) until you get the message "Operation Successfully Completed". If you get this message you can proceed to the next part, the burning of this patched image.

[عبود هكر]

مشكور أخوي لاكن لو إنت كاتب منقول أسفل كل موضوع يكون أحسن علشان ا نهضم حق اللي مسوي الشرح
لأني شايف الشرح بموقع آخر........ولك كل التقدير
عبود هكر

[Bo-Ja$$im]

مشكوور اخوي على الشرح بس الشرح غير مرتب وبالانجليزي

لو تسويه بالعربي يكون افضل ومع الترتيب

عشان يصير الباتش المتكامل

[W11 PELE]

BURNING A PATCHED IMAGE (BIN/CUE) OF WE7


There are various ways of burning a patched image file, this will explain how to burn it with CDRWin.

- Open CDRWin.
- Select "Record Disc".
- Press "load cuesheet" and find the .cue file you created in the guide to creating an image.

2 Having loaded the cuesheet (.cue file) you should be presented to a screen that looks something like this:













وبعد الصورة



Make sure you select your burner under "CDROM Recorder" (see picture above). It is advisable to burn the CD at 1x speed as this will ensure
less errors on the disc and protect the laser in your PS2. In the above example the speed is set to "MAX".

- Insert a CDR (important that this is not a CDRW) disc in your burner.
- Press start.

Wait for the burning to finish (could take anything from a minute to an hour depending on your burner and the speed you set). When you get the message "Operation Successfully Completed" you can safely eject your CD from your burner.

Now boot up the game and enjoy.

[Bo-Ja$$im]

اقوول عبود هكر ممكن ايميلك لاني ابيك ضرووري اوكي

[W11 PELE]

صح اخوي عبود هكر بس انا كنت لما انهي الموضوع كنت بكتب منقول بعدين انا ما جبتة من منتدى انا جبتة من موقع

[Bo-Ja$$im]

عبود هكر هذا ايميلي ma373@hotmail.com اتمنى انك تضيفني لاني بقوولك شي

[Boksic 11]

ترانا عرب يا شيخ!!!

[كلايفرت]

اضن الموضوع ماله فايده

لسبب
1- باللغة الانجليزية

2- انا كاتب موضوع زي كذا وبالعربي

[W11 PELE]

اخوي كلايفرت الموضوع مو عن استخراج الايمج بس انا بكملة