mmmmhhhh
08-11-2006, 04:22 PM
اعزائي اعظاء المنتدى الكرام لدي جهاز يحوي المود جب MATRIX INFINITY
وهارد WD 20 وشغال يبوت من الهارد ويعمل من دون عدسه .
اريد منكم التوظيح لي كيف يمكن ان ابدل الهارد بهارد اكبر
وانا فرمتت هارد جديد وهو 80 بل WINHLLP وحملته بالعاب ولكن لم يعمل دخلت لموقع الخاص بالمود جب وحسب فهمي يجب ان اهيه الهارد ببرنامج ال DEV2 وقمت بنزال البرنامج من النت ولاكن لااستطيع ان اضعه على الهارد واليكم التعليمات وارجو التوظيح كيف اضع ال DEV2 على الهراد
============================
INFINITY DEV2 INSTALLER V1.1
============================
- What's new :
- Added V12 external hard drive interface compatibility.
- Enabled loading of BOOT.ELF from the boot path of the
DEV2I.ELF executable (e.g. to use it from naplink, just
place DEV2I.ELF and BOOT.ELF in the same directory and
the BOOT.ELF file will be loaded directly from HOST: ).
Should work with any launcher program that supports
correct arguments passing to the launched elf since the
default path is taken from argv[0];
If you don't understand any of this, just follow the
instructions below to burn the installation cd and
everything will work automatically. ;-)
Instructions :
--------------
This program enables you to install any PS2 executable on your HDD and
lauch it as the default DEV2 program.
To use it :
- Rename the ELF executable that you want to use as BOOT.ELF
- Burn a PS2 cd with all the files included in this archive and your
selected BOOT.ELF.
- Boot the cd and follow the on-screen instructions.
E.G. to use PS2OS directly from the HDD :
Rename the file PS2OS.ELF as BOOT.ELF and burn a cd with the following
files :
DUMMY.BIN
DUMMY2.BIN
SYSTEM.CNF
DEV2I.ELF
BOOT.ELF
After the installation is complete you can launch PS2OS directly from
your HDD by holding L1 just after reset (or select DEV2 as the default
boot mode in the config screen)
انا لا اعرف كيف اجعل الملفات في قرص لكي اظعها على الهارد ومن اين ائتي بالبوت (BOOT.ELF ) حيث لايوجد مع بقية الملفات وشكرا لكم
وهارد WD 20 وشغال يبوت من الهارد ويعمل من دون عدسه .
اريد منكم التوظيح لي كيف يمكن ان ابدل الهارد بهارد اكبر
وانا فرمتت هارد جديد وهو 80 بل WINHLLP وحملته بالعاب ولكن لم يعمل دخلت لموقع الخاص بالمود جب وحسب فهمي يجب ان اهيه الهارد ببرنامج ال DEV2 وقمت بنزال البرنامج من النت ولاكن لااستطيع ان اضعه على الهارد واليكم التعليمات وارجو التوظيح كيف اضع ال DEV2 على الهراد
============================
INFINITY DEV2 INSTALLER V1.1
============================
- What's new :
- Added V12 external hard drive interface compatibility.
- Enabled loading of BOOT.ELF from the boot path of the
DEV2I.ELF executable (e.g. to use it from naplink, just
place DEV2I.ELF and BOOT.ELF in the same directory and
the BOOT.ELF file will be loaded directly from HOST: ).
Should work with any launcher program that supports
correct arguments passing to the launched elf since the
default path is taken from argv[0];
If you don't understand any of this, just follow the
instructions below to burn the installation cd and
everything will work automatically. ;-)
Instructions :
--------------
This program enables you to install any PS2 executable on your HDD and
lauch it as the default DEV2 program.
To use it :
- Rename the ELF executable that you want to use as BOOT.ELF
- Burn a PS2 cd with all the files included in this archive and your
selected BOOT.ELF.
- Boot the cd and follow the on-screen instructions.
E.G. to use PS2OS directly from the HDD :
Rename the file PS2OS.ELF as BOOT.ELF and burn a cd with the following
files :
DUMMY.BIN
DUMMY2.BIN
SYSTEM.CNF
DEV2I.ELF
BOOT.ELF
After the installation is complete you can launch PS2OS directly from
your HDD by holding L1 just after reset (or select DEV2 as the default
boot mode in the config screen)
انا لا اعرف كيف اجعل الملفات في قرص لكي اظعها على الهارد ومن اين ائتي بالبوت (BOOT.ELF ) حيث لايوجد مع بقية الملفات وشكرا لكم