tidus & ffx
11-09-2009, 05:11 PM
لسلام عليكم ورحمة الله وبركاته
أخواني انا استخدم توزيعة
Linux Mint 7 x64
الحمدلله التوزيعة مستقره وتعمل بشكل جيد .ومع العلم اني مازلت مبتدىء في عالم لينوكس ولكن الحمدلله حليت جميع مشاكل العتاد ..ومع العلم ايضا ان الراوتر معرف ويعمل بشكل جيد على الXP ... ولكن المشكلة بالأتصال بالأنترنت في mint وكما تعلمون هي مبينه على اليبنتو
فقد حاولت عدة مرات وبحث بالمنتدى ولم أجد حل الى الآن
أستخدم راوتر نوع Billion BiPAC 7001
http://au.billion.com/images/router-images/adsl-diagram-7001.gif
من نوع USB .. وقرأت الكتيب الذي يأتي مع الرواتر ولكني لم أفهمه جيدا وهذا هو النص
3.2.5 Configuring PC in Linux:
To enable LAN traffic over the ethernet interface:
% ifconfig eth2 192.168.1.200 up
You may also need to modify the netmask and route for the interface. Refer to the manual pages for ifconfig and route for more information.
To test the LAN connection is alive by pinging the remote side:
% ping 192.168.1.1
To disconnect the LAN interface:
% ifconfig eth2 down
24
3.3.5 Configuring PC in Linux:
The PPP daemon (pppd) talks to the driver over TTY devices. Before the driver can be used, the devices /dev/ttyG0 and /dev/cug0 need to be reated. This can be performed by executing:
% make devnodes
38
لكني لا أعرف كيف أنصبه .. أفيدوني أفادكم الله أخواني
وجزاكم الله خيراً .
أخواني انا استخدم توزيعة
Linux Mint 7 x64
الحمدلله التوزيعة مستقره وتعمل بشكل جيد .ومع العلم اني مازلت مبتدىء في عالم لينوكس ولكن الحمدلله حليت جميع مشاكل العتاد ..ومع العلم ايضا ان الراوتر معرف ويعمل بشكل جيد على الXP ... ولكن المشكلة بالأتصال بالأنترنت في mint وكما تعلمون هي مبينه على اليبنتو
فقد حاولت عدة مرات وبحث بالمنتدى ولم أجد حل الى الآن
أستخدم راوتر نوع Billion BiPAC 7001
http://au.billion.com/images/router-images/adsl-diagram-7001.gif
من نوع USB .. وقرأت الكتيب الذي يأتي مع الرواتر ولكني لم أفهمه جيدا وهذا هو النص
3.2.5 Configuring PC in Linux:
To enable LAN traffic over the ethernet interface:
% ifconfig eth2 192.168.1.200 up
You may also need to modify the netmask and route for the interface. Refer to the manual pages for ifconfig and route for more information.
To test the LAN connection is alive by pinging the remote side:
% ping 192.168.1.1
To disconnect the LAN interface:
% ifconfig eth2 down
24
3.3.5 Configuring PC in Linux:
The PPP daemon (pppd) talks to the driver over TTY devices. Before the driver can be used, the devices /dev/ttyG0 and /dev/cug0 need to be reated. This can be performed by executing:
% make devnodes
38
لكني لا أعرف كيف أنصبه .. أفيدوني أفادكم الله أخواني
وجزاكم الله خيراً .