how to make private server 100%
Guide] Private server 100%
السلام عليكم و رحمة الله و بركاته
بسم الله الرحمن الرحيم
كل عام و أنتم بخير و مبارك شهر رمضان
أود ان أشارككم ((Private server رائع لــ2.1.3 Illidan Exists
سيكون الــGuide سهلاً إن شاء الله و سأحل مشاكلكم مع السيرفر قدر ما استطيع
1. الملفات التي يجب تجميلها ((File Front
2. إنستال للملفات
3. تشغيل السيرفر
1.
حمل الــ SQL , MySQL
http://files.filefront.com/MySQL+504+and+SQLyog+64rar/;8057465;;/fileinfo.html
حمل الــ ريباك (الأدوات لــ الكماند و غيرها)
http://files.filefront.com/Julianxs+Repack+V2+updatedrar/;8057453;;/fileinfo.html
حمل تصليحات السيرفر
http://files.filefront.com/All+in+1+fixs+V1rar/;8098334;;/fileinfo.html
حمل مشغل المابس
US
http://filebeam.com/c1d88fffe3284c1167b9dffb262297fd
EU
http://filebeam.com/7b7a4d48defb7d6da290dfde3da2869a
حمل 1 و هو الذي تلعب فيه أكثر يو اس أو أي يو
2. file installing
افتح جوليان اكس ريباك
http://i174.photobucket.com/albums/w114/Julian121/Step1.jpg
افتح ماب اكستراتور
http://i174.photobucket.com/albums/w114/Julian121/Step2.jpg
اختر أي دي
http://i174.photobucket.com/albums/w114/Julian121/Step3.jpg
انسخ أي دي و الصقه في ملف واو
http://i174.photobucket.com/albums/w114/Julian121/step4.jpg
اصنع ملفاً جديداً و سمه مابس (Maps)
http://i174.photobucket.com/albums/w114/Julian121/Step6.jpg
يجب ان يكون ملف واو هكذا
http://i174.photobucket.com/albums/w114/Julian121/Step7.jpg
و يجب ان يكون ملف مابس خالياً
شغل أي دي و انتظره سيأخذ اكثر من خمس دقائق . ساعةً معي
http://i174.photobucket.com/albums/w114/Julian121/Step8.jpg
سيختفي تلقائياً عند الإنتهاء و ستعرف انه لا يوجد اخظاء إذا كان ملف مابس مملوئاً بملفات بأسم مابس
http://i174.photobucket.com/albums/w114/Julian121/finishedmaps.jpg
و الآن انسخ الملف و ضعه في ملف جوليانكس ريباك
http://i174.photobucket.com/albums/w114/Julian121/Untitled-4.jpg
لن تخرب هذه الخطوة على واو الأصلية لأنك ستسطيع اللعب بالإثنين وقت ما تشاء
افتح الــ installer MY SQL
اختر تيبيكال ثم نكست
http://s2.supload.com/free/Step_2.jpg/view/
انقر انستال
http://s2.supload.com/free/Step_3.jpg/view/
بعد الانستال انقر نكست مرتان حتى اخر جزء من الويزارد
http://s2.supload.com/free/Step_4.jpg/view/
اجعله كما في الصورة ثم انستال
http://s2.supload.com/free/Step_5.jpg/view/
اجعله كما في الصورة و انقر نكست
http://s2.supload.com/free/Step_8.jpg/view/
اختر انستال اس ويندوز سيرفر
و ضع اسم و باس وورد المي اس كيو ال
اقترح Root و اعتقد لنه عليك جعله رووت
http://s2.supload.com/free/Step_9.jpg/view/
اضغط اكسكيوت
http://s2.supload.com/free/Step_10.jpg/view/
عندما يصبح كل شيء كما في الصورة انقر على فنش
http://s2.supload.com/free/Step_11.jpg/view/
الآن دور الــ اس كيو ال
افتحه
انقر نكست
http://s2.supload.com/free/Step_a.jpg/view/
انقر أي اكسبت...
http://s2.supload.com/free/Step_b.jpg/view/
اختر ما تريده او تفضله
http://s2.supload.com/free/Step_c.jpg/view/
انتظر حتى ينتهي ثم نكست
http://s2.supload.com/free/Step_e.jpg/view/
كما في الصورة ثم نكست
http://s2.supload.com/free/Step_f.jpg/view/
سيفتح تلقائياً .
النيم و الباس رووت او كما كتبت في ال مي اس كيو ال
http://s2.supload.com/free/Step_h.jpg/view/
انقر اقري و احفظ الباسس
http://s2.supload.com/free/Step_i.jpg/view/
فوق على اليمين عند لوكال هوست رووت انقر بالزر الأيمن و اضغط على كريت ديتبيس و سمه كما في الصورة من دون أي إضافات و إلا...
http://s2.supload.com/free/Step_j.jpg/view/
ستجد انتريكس تحت الرووت لكوال هوست اضغط بالزر الايمن و اختر Restore from mysql dump
http://s2.supload.com/free/Step_l.jpg/view/
في جوليان اكس ريباك ادخل ملف اس كيو ال و اختر
و اضغط اكس كيوت TNPS7
http://s2.supload.com/free/Step_m_1.jpg/view/
http://s2.supload.com/free/Step_m_2.jpg/view/
ملاحظة قد يأخذ الاكس كيوت هنا من دقيقة إلى ساعة او حسب جهازك
عندما ينتهي اضغط كلوس
بعد ان ينتهي الاكس كيوت افعل مثل الخطوة
http://s2.supload.com/free/Step_a.jpg/view/
لكن هنا اختر ميسينق تابلس ثم اكس كيوت و انتظر
http://s2.supload.com/free/Step_o_1.jpg/view/
http://s2.supload.com/free/Step_o_2.jpg/view/
عندما ينتهي اضغط كلوس
http://s2.supload.com/free/Step_p.jpg/view/
و افعل نفس الطريقة مع الملف all in 1 fixes و كل الملفات في ملف اس كيو ال.... او يمكنك تركها حالياً و فعل ذلك لاحقاً او يمكن لك ان لا تفعل . إنها رغبتك مع هذه الملفات
اضغط على ريفريش اوبجيكت يوسير . افتح الانتريكس ديت بيس و إختر اكونتس ثم اضغط على اكونتس تيبل داتا
http://s2.supload.com/free/Step_q_1.jpg/view/
http://s2.supload.com/free/Step_q_2.jpg/view/
http://s2.supload.com/free/Step_q_3.jpg/view/
عبئ ال مربعات بما تريد (اكون نيم يكون لوقين و ليس اكونت في المربعات) اذهب إلى اخر المربعات إلى اليمين و ضع في مربع فلاقس 8 و في مربع ال جي ام اكتب AZ ليكون الاكونت لجي ام
ثم اضغط سيف شانجس التي تشبه الديسك http://s2.supload.com/free/Step_r.jpg/view/
اغلق ال اس كيو ال . معروفة اضغط الاكس الاحمر في الزاوية العليا
3.server time
أخيراً لم يتبق إلى القليل
إذهب إلى جوليانكس ريباك
و ستجد ملفات بهذه الأسماء
Logonserver antrix realms ستكون الملفات من نوع كونف لكن تفتح عن طريق notepad
ادخل انتريكس و يجب ان يكون هكذا
ستجد سطراً هكذا
<Database Hostname = "host" Username = "username" Password = "passwd" Name = "datebase" Port = "3306" Type = "1">
اجعله هكذا
<Database Hostname = "localhost" Username = "root" Password = "root" Name = "antrix" Port = "3306" Type = "1">
و في اسفل ال النوت ستجد كلمات هكذا
<LogonServer DisablePings = "0"
RemotePassword = "change_me_world">
اجعلها هكذا
<LogonServer DisablePings = "0"
اخرج من الانتريكس و ادخل لوقون سيرفر
ستجد كلمات هكذا
<LogonDatabase Hostname = "host"
اجلها هكذا
<LogonDatabase Hostname = "localhost"
<LogonServer RemotePassword = "change_me_logon">
اجعله هكذا
<LogonServer RemotePassword = "root">
ادخل الريلم
ستجد في اخر ال ملف كلمات هكذا
<Realm1 Name = "test realm"
Address = "127.0.0.1:8129"
تأكد من انه هكذا و اخرج منه
ها قد انتهيت
شغل الــ My SQL command client
ستجده في ابدأ او ستارت
ثم في جوليانكس ريباك افتح لوقون سيرفر (البرنامج)
ثم افتح ال انتريكس إلى ان يتوقف
set realmlist eu.logon.worldofwarcraft.com
للسيرفرات الاصلية
set realmlist 127.0.0.1
للبرايفت
مبرووووووووووووووووووووووووووووووووووووك البريفيت سيرفر
رد: how to make private server 100%
حدثت معي مشكلة اخرتني عن اكمال الــguide
بعض الأوامر و هي التي تبدأ بنقطة
سيكون شرحها بالانجليزي
.modify HP
This command increases your health for like 100000000
Example
.Modify HP 50000 50000
You need to put the health you want twice
.modify mana
Same as hp
.modify energy
.modify rage
Both are same as hp and mana
.kill
Kill any mobs you may need to do it more than once to kill bosses
.recall port
Ports you any where
.recall list
Gives you the places you can port to
.levelup
Level up you
.modify talent
Gives you the talent points you want
. additem
Adds an item to your bag you need an id of the item to get it
Example .additem 21345
.npc spawn
Spawn a mob at you you need the id of the mob to spawn em
.modify speed
Increases your movement speed 255 is max
40 is 100% speed so how is 255 ? lol
Normal speed is 7
.modify scale
Changes your size normal size is 1 how will .modify scale 100 will be ? don’t ask me
.cheat fly
Makes you fly
.cheat land
Switches .cheat fly off
.learn
Learns a spell with its id
.modify gold
Puts the amount of gold you want in ur inventroy
.morph
Changes your look into any thing you want even ragnaros , currently I don’t know the display ids
Well , I think this is all what you may need for fun
ما هو ال أي دي ؟
ال أي دي هو الرقم الذي يظهر فوق عند مربع المواقع مثال إن اخترت راقناروس سيكون الرقم 11502 إن اخترت الليدان سيكون الرقم ما يظهر فوق
للايتمس ارقام و للبوسس ارقام و للسبيلس او التعلمات ارقام
http://www.wowhead.com/?npc=11502
http://www.wowhead.com/?npc=22917
http://www.wowhead.com/?item=32521
http://www.wowhead.com/?item=32332
ارجو ان يكون هذا الموضوع قد ساعد احداً منكم
و افضل ما فيه هو انه يمكن لك ان تلعب به من دون اتصال بالإنتر نت
و أسوأ ما به انا فيه بقات مثل بعض البوسسات لا يتكلمون و يستخدمون السبيل الخاص بهم لكن لحسن الحظ ليس كل البوسسات لا تستطيع الليدان و ارتشيموند غير مبققين
لا يمكن لك دخول كارا و اس اس سي من دون رايد
فكيف تستطيع صنع رايد ؟ بفتح 2 واو ويندووس و قبل ذلك عليك صنع اكاونت ثاني
و ارجو ان يعجبكم هذا الموضوع و ارجو ان لا يكون صعباً عليكم
سأضع المزيد من الجويدات عن صنع موب و ايتم لاحقاً
All credits goes to Julianx
تحياتي WarBinger
رد: how to make private server 100%
مشكور اخوي عالشرح المفصل
وجزاك الله الف خير
ومبارك عليك الشهر
بس في ملاحظة
الصور ما تظهر عندي
والسموحة
رد: how to make private server 100%
مشكووور ..
بس الصور ما تطلع ..
و هذا Antrix ولا MaNGOS ؟
رد: how to make private server 100%
اقتباس:
و هذا Antrix ولا MaNGOS ؟
i think Antrix
رد: how to make private server 100%
أعتذر عن الصور يا شباب و هذا انتريكس . الشرح سهل حتى من دون الصور
رد: how to make private server 100%
رد: how to make private server 100%
شويت اللي قلتلي 100% بس اخر شي لما اكتب الاكاونت
unable to connect
رد: how to make private server 100%
شووف الريلم ليست يا اخوي
تأكد انها
Set Realmlist 127.0.0.1
رد: how to make private server 100%
صار كل شي تمام :D
بس يقول لي النسخة غير متوافقة ...
شنو الحل ؟؟
رد: how to make private server 100%
رد: how to make private server 100%
اقتباس:
المشاركة الأصلية كتبت بواسطة DJ.MAX
شفت حل الى المشكلتي ..
بس يوم دخلت ما لقيت السيرفر ...
شوف الصورة :
مشكلتك واجتهتني لمدة و في النهاية هي سهلة
لما تشغل MySQL command client
اكتب RooT
و لم تشغل لوغون سيرفر
لازم يكون هكذا
http://file.uploadr.com/10751-embed
بعدها شغل الأنتريكس إلى ان يكون هكذا
http://img337.imageshack.us/img337/8...rix1ac2.th.jpg
و الق نظرة على اللوغون سيرفر تأكد من انه يوجد كلمة
Registering realm 'testrealm' under id 1
و حل مشكاتك هنا شوف الوغون و الانتريكس و تأكد من اللون الأحمر
لوغون
#######################################################################
# Antrix Realms Configuration File
# Last updated at revision 446 by Burlex
#######################################################################
/********************************************************************************
* How to use this config file: *
* Config files are in a block->variable->setting format. *
* A < signifies the opening of a block, the block name is expected after that. *
* After the block name, a space and then the settings sperated by = / ' '. *
* *
* e.g. *
* <block setting="0" someval = "1"> *
* *
* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
* of the line, or in shell format (#). *
********************************************************************************/
# LogonDatabase Section
#
# These directives are the location of the `realms` and `accounts`
# tables.
#
# LogonDatabase.Host - The hostname that the database is located on
# LogonDatabase.Username - The username used for the mysql connection
# LogonDatabase.Password - The password used for the mysql connection
# LogonDatabase.Name - The database name
# LogonDatabase.Port - Port that MySQL listens on. Usually 3306.
# LogonDatabase.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#
<LogonDatabase Hostname = "localhost"
Username = "root"
Password = "root"
Name = "antrix"
Port = "3306"
Type = "1">
# Host Directive
#
# This is the address that the realmlist will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# Note: ISHost is the interserver communication listener.
#
<Listen Host = "0.0.0.0"
ISHost = "0.0.0.0"
RealmListPort = "3724"
ServerPort = "8093">
# Server console logging level
#
# This directive controls how much output the server will
# display in it's console. Set to 0 for none.
# 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#
<LogLevel Screen = "0"
File = "-1">
# Account Refresh Time
#
# This controls on which time interval accounts gets
# refreshed. (In seconds)
# Default = 600
#
<Rates AccountRefresh = "600">
# Accepted Build Range Setup
#
# These two directives set up which clients will be
# allowed to authenticate with the realm list.
#
# Set these to the same builds that the server was
# compiled for.
#
# As of the last update, version 2.1.1 was build 6739.
#
<Client MinBuild = "6739"
MaxBuild = "6898">
# WorldServer Setup
#
# This directive controls the password used to authenticate with the worldserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
# Default: "change_me_logon"
#
<LogonServer RemotePassword = "root">
انتريكس
#######################################################################
# Antrix Configuration File
# Last updated at revision 446 by Burlex
#######################################################################
/********************************************************************************
* How to use this config file: *
* Config files are in a block->variable->setting format. *
* A < signifies the opening of a block, the block name is expected after that. *
* After the block name, a space and then the settings sperated by = / ' '. *
* *
* e.g. *
* <block setting="0" someval = "1"> *
* *
* Comments can be in C format, e.g. /* some stuff */, with a // at the start *
* of the line, or in shell format (#). *
********************************************************************************/
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Database Section
#
# Database.Host - The hostname that the database is located on
# Database.Username - The username used for the mysql connection
# Database.Password - The password used for the mysql connection
# Database.Name - The database name
# Database.Port - Port that MySQL listens on. Usually 3306.
# Database.Type - Client to use. 1 = MySQL, 2 = PostgreSQL, 3 = Oracle 10g
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Database Hostname = "localhost" Username = "root" Password = "root" Name = "antrix" Port = "3306" Type = "1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Listen Config
#
# Host
# This is the address that the server will listen on.
# To listen on all addresses, set it to 0.0.0.0
# Default: 127.0.0.1 (localhost)
#
# WorldServerPort
# This is the port that the world server listens on.
# It has to be the same as what is specified in the
# realms table in the LogonDatabase.
# Default: 8129
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Listen Host = "0.0.0.0"
WorldServerPort = "8129">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Level Setup
#
# Console Logging Level
# This directive controls how much output the server will
# display in it's console. Set to 0 for none, or -1 to disable.
# -1 = Disabled; 0 = Minimum; 1 = Error; 2 = Detail; 3 = Full/Debug
# Default: 3
#
# World server packet logging feature
# If this directive is turned on, a file called `world.log`
# will be created in the server's directory and all packets
# sent and received by clients will be dumped here in bfg
# format.
# Default: 0
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<LogLevel Screen="0" File="-1" World="0">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Server Settings
#
# PlayerLimit
# This directive controls the amount of sessions that will be
# accepted by the server before it starts to add people to
# the server queue.
# Default: 100
#
# PlrUpdateDistance
# This directive controls the distance (internal yards) that the player can "see" up to
# and receieve updates for. For smaller servers, you can probably increase this number.
# Increasing this number will also increase the servers bandwidth consumption and CPU usage.
# Default: 80
#
# Motd
# This message will be displayed by the server in the chat
# box every time any user logs on. Colors can be used in the
# standard WoW format.
# Default: "No MOTD specified
#
# Send Build On Join
# This directive controls whether the server's internal revision
# will be sent to clients upon entering the world. Use it to help
# testers report bugs.
#
# Send Stats On Join
# This directive controls whether the server will send the online player
# count to a cilent when it enters the world.
#
# Breathing Setup
# If the breathing code is causing problems or you want to run a fun server, you can disable
# water checks by enabling this directive.
# Default: 1
#
# Speedhack detection
# If this directive is turned on, speedhack detection will be activated and speedhackers
# will be warned / kicked.
# Default: 0
#
# Level Cap
# This variable controls the level that stats will be generated up to internally.
# Beyond this level players can still see a higher level visually but their stats won't
# increase beyond this point.
# Default: 70
#
# Seperate Channels Control
# This directive controls whether horde and alliance chats will be seperated across channels.
# Set to 1 for blizzlike seperated channels, or 0 to allow horde/alliance to speak to each other
# across channels.
# Default: 0
#
# Compression Threshold
# This directive controls the limit when update packets will be compressed using deflate.
# For lower-bandwidth servers use a lower value at the cost of cpu time.
# Default: 1000
#
# Queue Update Rate
# This directive controls how many milliseconds (ms) between the updates
# that the queued players receieve telling them their position in the queue.
# Default: 5000 (5 seconds).
#
# Kick AFK Players
# Time in milliseconds (ms) that a player will be kicked after they go afk.
# Default: 0 (disabled)
#
# Connection Timeout
# This directive specifies the amount of seconds that the client will be disconnected
# after if no ping packet is sent. It is advised to leave it at the default.
# Default: 180
#
# Realm Type
# This is the realm type that will be used by the server to handle world pvp.
# Default: 0 (pve)(RPPVE)
# Other values: 1(pvp)(RPPVP)
#
# AdjustPriority
# Set the server to high process priority?
# Default: 0
#
# RequireAllSignatures
# This directive controls whether the full 10 signatures will be required in order
# to turn in a petition. Smaller servers would be better off having it turned off.
# Default: off
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Server PlayerLimit = "100"
PlrUpdateDistance = "80"
Motd = "No MOTD specified."
SendBuildOnJoin = "1"
SendStatsOnJoin = "1"
EnableBreathing = "1"
SpeedhackProtection = "0"
LevelCap = "70"
SeperateChatChannels = "0"
CompressionThreshold = "1000"
QueueUpdateInterval = "5000"
KickAFKPlayers = "0"
ConnectionTimeout = "180"
RealmType = "1"
AdjustPriority = "0"
RequireAllSignatures = "0">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Die Directive
#
# If this triggers it means you didn't read your config file!
# Just comment it or remove it when you've read this.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Power regeneration multiplier setup
#
# These directives set up the multiplier in which regen values will be
# multiplied by every 2 seconds.
# Powers:
# Power1 = Mana, Power2 = Rage, Power3 = Energy
#
# Reputation:
# Kill = Rep gained on kill, Quest = rep gained from quests
#
# Honor:
# Honor = multiplier used to calculate honor per-kill.
#
# PvP:
# PvPTimer = in ms, the timeout for pvp after turning it off. default: 5mins (300000)
#
# XP:
# The xp that a player receives from killing a creature will be multiplied
# by this value in order to get his xp gain.
#
# RestXP:
# Value is the amount of rest XP a player will recieve per minute of rest time.
#
# Drop:
# This value will be multiplied by any gold looted and the drop percentages of the
# items for creatures will also be multiplied for this to determine which items
# to drop.
#
# Save:
# Value in milliseconds (ms) that will be between player autosaves.
# Default: 300000 (5 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Rates Health="1"
Power1="1"
Power2="1"
Power3="1"
QuestReputation="1"
KillReputation="1"
Honor="1"
PvPTimer="300000"
Compression="1"
XP="1"
QuestXP="1"
RestXP="1"
Drop="1"
DropMoney="1"
Save="300000">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# GM Client Channel
#
# This should be set to 'gm_sync_channel' for the My_Master addon to work.
#
# Default: gm_sync_channel
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<GMClient ReqGmClient = "0" GmClientChannel = "gm_sync_channel">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Terrain Configuration
#
# Set the path to the map_xx.bin files and whether unloading should be enabled
# for the main world maps here. Unloading the main world maps when they go idle
# can save a great amount of memory if the cells aren't being activated/idled
# often. Instance/Non-main maps will not be unloaded ever.
#
# Default:
# MapPath = "maps"
# UnloadMaps = 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Terrain MapPath = "maps" UnloadMaps = "1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Log Settings
#
# Cheaters:
# This directive sets up the cheater logging file, if turned on any
# cheat / packet exploit / speedhack attempts will be logged here.
#
# GMCommands:
# These two directives set up the GM command logging fie. If turned on,
# most gm commands will be logged for this file for abuse investigation, etc.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Log Cheaters="0" GMCommands="0">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Mail System Setup
#
# These directives control the limits and behaviour of the ingame mail system.
# All options must have Mail prefixed before them.
#
# ReloadDelay
# Controls the delay at which the database is "refreshed". Use it if you're
# inserting mail from an external source, such as a web-based interface.
# 0 turns it off.
# Default: 0
#
# DisablePostageCostsForGM
# Enables/disables the postage costs for GM's. DisablePostageCosts overrides this.
# Default: 1
#
# DisablePostageCosts
# Disables postage costs for all players.
# Default: 0
#
# DisablePostageDelayItems
# Disables the one hour wait time when sending mail with items attached.
# Default: 1
#
# DisableMessageExpiry
# Turns off the 30 day / 3 day after read message expiry time.
# WARNING: A mailbox still cannot show more than 50 items at once
# (stupid limitation in client).
# Default: 0
#
# EnableInterfactionMail
# Removes the faction limitation for sending mail messages. Applies to all players.
# Default: 1
#
# EnableInterfactionMailForGM
# Removes the faction limitation for sending mail messages, but only applies
# to GM's. EnableInterfactionMail overrides this.
# Default: 1
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Mail ReloadDelay="0"
DisablePostageCostsForGM="1"
DisablePostageCosts="0"
DisablePostageDelayItems="1"
DisableMessageExpiry="0"
EnableInterfactionMail="1"
EnableInterfactionMailForGM="1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Status Dumper Config
#
# These directives set up the status dumper plugin. Filename is an
# absolute or relative path to the server binary. Interval is the
# time that the stats will be dumped to xml.
# Default: stats.xml / 120000 (2 minutes)
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<StatDumper FileName = "stats.xml" Interval = "120000">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Startup Options
#
# Preloading
# This directive controls whether the entire world will be spawned at server
# startup or on demand. It is advised to leave it disabled unless you are a
# developer doing testing.
# Default: off
#
# Background Loot Loading
# This directive controls whether loot will be loaded progressively during
# startup or in the background in a seperate thread. Turning it on will
# result in much faster startup times.
# Default: on
#
# Multithreaded Startup
# This controls whether the server will spawn multiple worker threads to
# use for loading the database and starting the server. Turning it on
# increases the speed at which it starts up for each additional cpu in your
# computer.
# Default: on
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<Startup Preloading = "0"
BackgroundLootLoading = "1"
EnableMultithreadedLoading = "1">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# LogonServer Setup
#
# DisablePings
# This directive controls whether pings will be sent to the logonserver to check
# if the connection is still "alive". Expect problems if it is disabled.
# Default: 0
#
# RemotePassword
# This directive controls the password used to authenticate with the logonserver.
# It must be the same between the two configs. If it is not, your server will
# not register.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
<LogonServer DisablePings = "0"
RemotePassword = "root">
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Die Directive
#
# If this triggers it means you didn't read your config file!
# Just comment it or remove it when you've read this.
#
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
1 مرفق
رد: how to make private server 100%
رد: how to make private server 100%
تلقى في ملف انتريكس كونف جملتين
مسحمهم الجملتين هم
<die msg="I am a newb who didn't even read half my config file!">
<die2 msg="I read nearly all my config file, but not the whole thing!">
رد: how to make private server 100%
شغال معي زي التمام
بس لما جيت اسوي لوق ان تطلع لي مسج Unable to validated game
version
كل الخطوات مية مية ومتأكد!!
وش الحل ؟
