~ ( أخــوان ( استفساراتكــم + طلبـاتكـــم + اسئلتكـم ) حطوهـا هنــا علشان الزحمـة) ~

[Power]

الســــــلام عليكـــــــــــــم :

أخــوان ( استفساراتكــم + طلبـاتكـــم + اسئلتكـــم ) حطوهـا هنــا علشان الزحمــة لان المنتدى امتلاء مواضيـع استفسارات

ابي توقيع + ممكن سوال + ممكن طلب

حطوهـا هنــا علشـان مانزاحم انفسنــا لو تسمحـــون وفي اخ حاط موضوع للطلبات ياليت يكون هنـا لان موضوعه فقط للطلبات اما هنا كل شيء

اتمنى منك اخوي انك تلبي طلبات الاعضاء هنا وراح اساعدك اوكي حبيبي

بـور

":"

[القاتل21]

ابي طرقت صنع سكوت ستاينر في شت يور موث

[Power]

مــن عيــوني أخــوي ( القاتـل 21 ) هذي الطريقــــة


طريقـة صنــع المصـارع سكـوت ستاينـر في سمـاك داون شـت يور مـاوث /





-- BASE MODEL --
Male Average

-- BASE EDIT --

-- BASIC PIECES --

Head - Hair 18 (*,-75,59,24)

Face - Eyebrows 6 (70,-78,40,60)
Face - Eyes 6 (*,-90,-3,0)

CHEEK/FACE SHAPE
Face Edit - Skin 7 - Face Model 19
Eyebrow (12/-30)
Eyes (1/-7) (-34/-70)
Nose (-25/28) (62/0)
Cheek (-23)
Mouth (10/20)
Jaw (20/40) (-18)


-- LAYERS --
Face - Mustache 6 (100,-78,90,-25)
Face - Mustache 58 (100,-79,88,-35)

Body - Skin 5

Legs - Tights - Blank 1, Length 100 (100,*,-50,-100)

Feet - Shoes - Blank 12, Length -55 (*,*,-30,-100)

***Now for the huge numbers of design pieces to be place*

Design - Face - Simple 158 *reduce three times, rotate twice, and place on his chin a little way under his lips as the top of the dark goatee* (100,*,-100,-100)
Design - Face - Simple 166 *reduce once, rotate once, and place on his chin overlapping the triangle as the main part of his dark goatee* (100,*,-38,-100)

Design - Body - Letters - Alphabet Font 1 *reduce twice and write 'BIG POPPA PUMP' over his ass, with each word appearing just below the last* (100,100,5,-10)

Design - Body - Letters - Numeral - Font Page 3, Middle Font *place the '0' on the front of his tights, reduce it once, then move it a little to the left as you look at it* (100,100,5,-10)
Design - Body - Letters - Numeral - Font Page 5, Bottom Font *put '69' inside the previous piece with the 6 high to the left and the 9 low to the right, you`ll need to reduce three times to fit it in* (100,100,5,-10)

**Now for the hard part - the Superman logo on the side of his tights. I make this by making a red diamond, then putting two smaller black diamonds inside to make it look hollow, then I flatten the top with two rectangles, one red and one black to trim off the top of the diamond. An 'S' then goes inside.***

Design - Body - Simple 139 *reduce once and put on the side of his right thigh, not quite as low as you can make it* (100,100,-15,20)
Design - Body - Simple 139 *reduce twice and put this piece inside the previous piece, slightly below the middleto leave a thin red line around the bottom half* (100,*,-100,-100)
Layer List - Copy the previous piece - *move this piece so that it is slightly above the middle of the red diamond leaving the same thin red line around the top half* (100,*,-100,-100)
Design - Body - Simple 166 *reduce three times and place this bar so that it joins the diamond over the top half* (100,100,45,-10)
Design - Body - Simple 166 *reduce once and use this bar to cover over the top of the previous piece and the red diamond that doesnt fit the superman shape at the top of the tights* (100,*,-45,-100)
Design - Body - Letters - Alphabet Font 1 *reduce twice and put an 'S' inside the superman shape* (100,100,5,-15)

***Now repeat these six steps on the other thigh***


-- SKIN COLOR --
(-88,-20,20)

-- FIGURES --

FORM
Head (30) (80)
Neck (-10/24) (-49)

Chest (89/24)
Shoulder (-54/19) (-15)
Abdomen (0/5) (36)
Arms (-17/18) (-68)
Forearms (-30/-10) (-100)
Hands (-30/10) (-60)

Waist (25/-30)
Thigh (9/9) (-87)
Legs (-12/-5) (-80)
Ankles (-25/-35)

HEIGHT
6'6" (because of modification to leg length)

--PROFILE--
Name - Scott Steiner
Ring Name - None
Nick Name - Big Poppa Pump
Biography - Man, Heavy, Face, Big Daddy
Ability - P 3/3, S 1/2, T 4/3, R 3/3 (22)
Logic - Grappler, Balanced


طلبـات ثانيـــة أخــوان ...

بــور

[غفوة]

سؤال عن مباريات سلوبر كنوكر متى واين استطيع مشاهدتها على الواقع؟

وممكن تخبرونا عن اي مباريات من نفس النوع متى كانت تحديدا وما هي نتائجها؟

[القاتل21]

لو ولوني ثقلت عليك تشفلنا التيم انجل (علشان اصطرهههههم:غضب: :غضب: )


وتذكر في اغنيه للأنر تيكر الي يقعد يتكلم و الجمهور يقول هاااي هااي ابيها بالتصوير حتى يقعد بالتصوير يسوي شوك سلام ومشكوووووووووور على طريقت صنع سكوت ستاينر وهي ضبطت معي

[عاشق باتيستوتا9]

ممكن تسوي لي توقيع يكون مكتوب أسمي فيه و

الصور : روب فان دام و كين و بروك ليسنر



و شكرا لك على الخدمة

[Mr.BM]

أنا أبي كيف أضع موضوعي اللي كاتبه مثلا بمنتدى البلاستيشن

بالتوقيع حتى أي واحد يضغط ويقرأ ومشكور

أرجو الشرح بدقه

مشكور,,,,,,,,,,

[Power]

القاتــل 21 :
بالنسبـة للتصاميـــم انـا حاليـا ادورهـا شـوي واجيبهــا ..

اما الاغنية للاسف مو عندي ...

عاشـق باتستوتـــا :

اوكي اخوي شف الارفـاق فيه التوقيـــع ...

ذا وولد :

اضغط على http:// من الرد وحط فيها الكلمة اللي تبيها تطلع للاعضاء وبعدها اضغط انتر حط بعدها لنك الموضوع واضغط انتر بيجيك كلام ضلله وحطه بالتوقيع من لوحة التحكم

اي طلبـات ثانيــة أخـوان ؟

[Power]

شارلي هاز


Charlie Haas
by Ceilican
20/1/03

*** Please note it is essential that the pieces are layered as I layer them here to avoid pieces overlapping incorrectly ***

*** The character '*' in place of a number in the formula indicates that the figure is either not alterable on that piece, or that the value for that piece does not matter (eg. a color setting when color has been set to -100 on that piece) ***

-- BASE MODEL --
Male Average

-- BASE EDIT --

-- BASIC PIECES --

Head - Hair 20 (*,-52,100,10)

Face - Eyebrows 19 (40,52,-30,0)
Face - Eyes 7 (*,-94,-3,0)

CHEEK/FACE SHAPE
Face Edit - Skin 9 - Face Model 11
Eyebrow (20/20)
Eyes (-40/5) (-20/15)
Nose (0/20) (-60/0)
Cheek (-30)
Mouth (15/0)
Jaw (-10/10) (-25)


-- LAYERS --
Face - Accessories 65 (100,-90,16,0)

Body - Skin 4
Body - Costume - Others 10 (100,25,40,-3)

Legs - Tights - Blank 1 - Length -80 (100,-95,100,-44)
Legs - Tights - Blank 1 - Length -100 (100,25,80,5)
Legs - Kneepad - Blank 1 (100,100,40,-5)
Legs - Kneepad - Blank 2 (100,25,75,5)

Feet - Shoes - Blank 10, Length -40 (*,-100,-10,5)

Arm - Wrist Bands - Both - Blank 2, length -75 (100,-100,-3,0)

Design - Letters - Body - Sign Page 1 *put a '/' on his chest. Now if you experiment you`ll find a point where two of these '/' shapes can run from either edge of the singlet to the centre and meet in the middle without overlapping. Place this piece at that position and we`ll make a copy to complete a lower 'V' shape* (100,100,50,-5)
Layer Edit - COPY the previous piece *rotate this copy once and then place it on the opposite side of the chest to form a 'V' shape that will overlap slightly at the bottom (100,100,50,-5)
Layer Edit - COPY the right-sided '/' shape *move it down two pixels, and to the right by one pixel* (100,100,50,-5)
Layer Edit - COPY the left-sided '/' shape *move it down two pixels, and to the left by one pixel* (100,100,50,-5)

*Thats the thick red 'V' on his chest, now for a thin white one higher up*
Design - Letters - Body - Sign Page 1 *put a '/' on his chest. Place this over the first red '/' that you positioned, then move it up by 10 pixels and towards the middle by 4, this should put it against the edge of the singlet higher up* (100,*,100,-100)
Layer Edit - COPY the previous piece *rotate this copy once and then place it on the opposite side of the chest to form a 'V' shape that will overlap slightly at the bottom into more of an 'x' (100,*,100,-100)
Design - Pattern - Body - Simple 159 *reduce three times and place this under the white 'v'so that it covers over the white lines that are making it an 'x' not a 'v'(100,25,30,-10)

Layer Edit - MOVE all the three pieces involved in making the white 'V' so that they sit behind the red 'v' (so the blue square doesnt cover up any red)

*Thats the front done, now we repeat those 'v' shapes on the back of his singlet*

Design - Letters - Body - Sign Page 1 *put a '/' on his BACK. Now if you experiment you`ll find a point where two of these '/' shapes can run from either edge of the singlet to the centre and meet in the middle without overlapping. Place this piece at that position and we`ll make a copy to complete a lower 'V' shape* (100,100,50,-5)
Layer Edit - COPY the previous piece *rotate this copy once and then place it on the opposite side of the back to form a 'V' shape that will overlap slightly at the bottom (100,100,50,-5)
Layer Edit - COPY the right-sided '/' shape *move it down two pixels, and to the right by one pixel* (100,100,50,-5)
Layer Edit - COPY the left-sided '/' shape *move it down two pixels, and to the left by one pixel* (100,100,50,-5)

Design - Letters - Body - Sign Page 1 *put a '/' on his back. Place this over the first red '/' that you positioned, then move it up by 7 pixels and towards the middle by 7, this should put it against the edge of the singlet higher up* (100,*,100,-100)
Layer Edit - COPY the previous piece *rotate this copy once and then place it on the opposite side of the back to form a 'V' shape that will overlap slightly at the bottom into more of an 'x' (100,*,100,-100)
Design - Pattern - Body - Simple 159 *reduce twice times and place this under the white 'v' so that it covers over the white lines that are making it an 'x' not a 'v'(100,25,25,-10)

Layer Edit - MOVE all the three pieces involved in making the white 'V' so that they sit behind the red 'v' (so the blue square doesnt cover up any red)

*stars on the kneepads*
Design - Pattern - Left Leg - Simple 161 *reduce once and move this piece into the centre of his kneepad* (100,*,100,-100)
Layer Edit - COPY the previous piece *reduce once and place at the centre of the original copy* (100,25,25,-5)
Design - Pattern - Right Leg - Simple 161 *reduce once and move this piece into the centre of his kneepad* (100,*,100,-100)
Layer Edit - COPY the previous piece *reduce once and place at the centre of the original copy* (100,25,-5,-5)

*Team Angle badges*
Design - Pattern - Body - Flag 30 *reduce once and place this as low as possible on the side of his right thigh* (100,100,-10,5)
Design - Pattern - Body - WWE 62 *reduce once and rotate twice, place this pattern on the outside his right thigh so that it straddles the flag* (60,-82,-20,50)
Design - Letters - Body - Alphabet Font 1 *reduce once and write 'A' over the 'F' of the previous piece* (100,25,10,-10)

Design - Pattern - Body - Flag 30 *reduce once and place this as low as possible on the side of his left thigh* (100,100,-10,5)
Design - Pattern - Body - WWE 62 *reduce once and rotate twice, place this pattern on the outside his left thigh so that it straddles the flag* (60,-82,-20,50)
Design - Letters - Body - Alphabet Font 1 *reduce once and write 'A' over the 'F' of the previous piece* (100,25,10,-10)


-- SKIN COLOR --
(-92,14,0)


-- FIGURES --

FORM
Head (-45) (13)
Neck (-29/-10) (0)

Chest (-23/-10)
Shoulder (-87,-5) (-9)
Abdomen (-6/-23) (12)
Arms (-30/-5) (-25)
Forearms (-35/-26) (-90)
Hands (-44/-12) (-58)

Waist (9/-41)
Thigh (-2/4) (20)
Legs (-5/-10) (13)
Ankles (-30/-30)

HEIGHT
6'2"


--PROFILE--
Name - Charlie Haas
Ring Name - None
Nick Name - Haas
Biography - Man, Heavyweight, Heel, American Superstar
Ability - P 3/3, S 2/3, T 4/3, R 2/2
Moves - ???
Logic - Balanced, Grappler

=====================================

شيلتون بانجامين
--------------------------------------------------------------------------------
Shelton Benjamin
by Ceilican
20/1/03

*** Please note it is essential that the pieces are layered as I layer them here to avoid pieces overlapping incorrectly ***

*** The character '*' in place of a number in the formula indicates that the figure is either not alterable on that piece, or that the value for that piece does not matter (eg. a color setting when color has been set to -100 on that piece) ***

-- BASE MODEL --
Male Average

-- BASE EDIT --

-- BASIC PIECES --

Head - Hair 8 (*,-89,-90,40)

Face - Eyebrows 13 (100,95,-23,0)
Face - Eyes 12 (*,41,-3,0)

CHEEK/FACE SHAPE
Face Edit - Skin 2 - Face Model 12
Eyebrow (10/20)
Eyes (-15/30) (-35/-60)
Nose (20/-10) (0/0)
Cheek (50)
Mouth (50/10)
Jaw (-40/40) (10)


-- LAYERS --
Body - Skin 8
Body - Costume - Others 10 (100,100,-4,0)

Arm - Wrist Bands - Both - Blank 2, length -61 (100,-100,-3,0)

Feet - Shoes - Blank 13, Length -30 (*,25,-65,80)

Legs - Tights - Blank 1, Length -81 (100,-95,-16,-28)
Legs - Tights - Blank 3, Length -90 (100,*,50,-100)
Legs - Tights - Others 38, Length -100 (100,25,-15,35)

Legs - Kneepad - Blank 7 (100,100,4,4)

Design - Pattern - Body - Simple 139 *rotate once and move this piece onto the front of his chest so that the bottom half of the diamond is protruding onto the blue of his tights* (100,100,-24,29)
Layer Edit - COPY the previous piece *move this copy precisely three pixels down* (100,*,100,-100)
Layer Edit - MOVE the white piece you just made so that it sits behind the red piece, and you get a white 'V' shape on the front of his chest - the white 'v' should look like a continuation of the white band round the side of his waist*

Design - Pattern - Body - Simple 139 *rotate once and move this piece onto the BACK of his chest so that the bottom half of the diamond is protruding onto the blue of his tights* (100,100,-20,30)
Layer Edit - COPY the previous piece *move this copy precisely three pixels down* (100,*,100,-100)
Layer Edit - MOVE the white piece you just made so that it sits behind the red piece, and you get a white 'V' shape on the back of his chest - the white 'v' should look like a continuation of the white band round the side of his waist*

*Two star patterns*
Design - Pattern - Body - Simple 161 *reduce once and move this piece into the centre of his chest about halfway between the 'U' cut into his singlet at the next, and the white 'v'* (100,-100,20,-100)
Layer Edit - COPY the previous piece *reduce once and place at the centre of the original copy* (100,25,-50,-10)
Layer Edit - COPY the previous piece *reduce one last time and place this copy inside the second copy* (100,25,-50,-10)
Design - Letters - Body - Sign Page 1 *place a '.' over the centre of the star, covering up the last little bit of white in the centre (100,25,-15,-10)

Design - Pattern - Body - Simple 161 *reduce once and move this piece into the centre of his back about level with the one on the front* (100,-100,20,-100)
Layer Edit - COPY the previous piece *reduce once and place at the centre of the original copy* (100,25,-50,-10)
Layer Edit - COPY the previous piece *reduce one last time and place this copy inside the second copy* (100,25,-50,-10)
Design - Letters - Body - Sign Page 1 *place a '.' over the centre of the star, covering up the last little bit of white in the centre (100,25,-15,-10)

*The Team Angle badge*
Design - Pattern - Body - Flag 30 *reduce once and move as low as you can place it on his right thigh* (100,100,-40,10)
Design - Pattern - Body - WWE 62 *reduce once, rotate twice, move this piece over the previous piece, as low as you can place it* (40,-90,-20,45)
Design - Letters - Body - Alphabet Font 1 *reduce once and place this over the 'F' of the previous piece, in the middle of the flag* (100,25,-24,-10)

Design - Pattern - Body - Flag 30 *reduce once and move as low as you can place it on his left thigh* (100,100,-40,10)
Design - Pattern - Body - WWE 62 *reduce once, rotate twice, move this piece over the previous piece, as low as you can place it* (40,-90,-20,45)
Design - Letters - Body - Alphabet Font 1 *reduce once and place this over the 'F' of the previous piece, in the middle of the flag* (100,25,-24,-10)


*** ADVANCED ***
*And finally we add a white border round the front of his costume at the top. I`ll number these pieces to help you.*
1. Design - Pattern - Body - Flag 4 *rotate once and reduce three times, place this piece over the middle of his right shoulder strap at the front, as high as it will go* (100,*,90,-100)
Layer Edit - MOVE the previous piece so it is the first piece on your layer list, behind everything else
2. Layer Edit - COPY the previous piece *move this copy down the shoulder strap so that the top of it touches the bottom of the original, you may have to move it slightly across to balance the white out on the two sides of the strap* (100,*,0,-100)
3. Layer Edit - Copy piece 2. *move this copy down the shoulder strap so that the top of it touches the bottom of piece 2.* (100,*,0,-100)

4.5.6. Layer Edit - COPY pieces 1,2, and 3. *move these copies across his chest to the same places on the left side shoulder strap*

7. Design - Pattern - Body - Simple 158 *reduce once, and place this piece continuing the white stripe along the outside of his singlet on the right side. You have to juggle it around a bit to stop the white line from looking too thick* (100,14,45,-100)
8. Layer Edit - COPY the previous piece *move this copy across his chest to the same position on the other side.
9. Design - Pattern - Body - Picture 9 *rotate three times, reduce once, we`re going to place this to make a white outline for the singlet in the little curved section in the middle of his chest* (100,*,80,-100)
Layer Edit - MOVE pieces 7,8 and 9 to sit behind the singlet, like you did for the flag pieces.


-- SKIN COLOR --
(-94,-95,15)


-- FIGURES --

FORM
Head (-34) (70)
Neck (-4/12) (-5)

Chest (30/7)
Shoulder (-83,-5) (-2)
Abdomen (-9/-16) (14)
Arms (-25/-12) (-30)
Forearms (-32/-26) (-88)
Hands (-34/-12) (-58)

Waist (5/-39)
Thigh (0/0) (3)
Legs (0/-5) (0)
Ankles (-30/-30)

HEIGHT
6'3"


بـــور

[R.V.D_911]

ممكن يا اخ بور تسويلي توقيع (متحرك فيه صور ة روب فان دام وتحط فيه اسمي )

ياريت لو بسرعة لو سمحت

[Power]

اخوي بكره او بعده يكون عندك لكن وجهين بس

[princevevo]

السلام عليكم
اخي بور

بالنسبة للتصاميم فانا عامل موضوع فيه كل عن شي عن sym
و فيه كل التصاميم الموجودة عالشبكة حتي ناثان جونز فهل تسمح لي بالمشاركة اذا طلب احد الاعضاء اي تصميم

[princevevo]

ممكن شوية صور حلوة لفان دام وليسنر

;-) ;-) ;-)

[Power]

اسف شباب انا مسافر للرياض بسبب وفاة قريب لي ططاتمنى من الاعضاء الصبر

[princevevo]

البقاء لله وترجع بالسلامة